Meteorological sensors Rotronic HC2-S3, HM4, MP100, MP400, etc.

Meteorological sensors of relative humidity and temperature with analog or digital output signals are used as part of meteorological stations. Active and passive protective radiation casings are provided for all versions.

Purpose: the probes are designed for the primary conversion of the measured value of humidity and temperature into digital and analog signals.

Scope of application:

• monitoring of meteorological parameters of atmospheric air;
• atmospheric sounding;
• measurement of humidity and outdoor air temperature;
• use as part of weather stations.

HC2-S3-HEATED is a probe for outdoor air, as well as as part of weather stations, for operation at humidity close to 100% with periodic ingress of droplet moisture. The humidity sensor is mounted on a heated substrate, which ensures rapid recovery of the probe after water ingress. A Teflon filter is installed on the probe to protect the sensor from contamination.

• HC2-S3-HEATED. Technical description

HC2-S3 is a probe for outdoor air, as well as as part of weather stations, for operation at temperatures up to -70 °C. A Teflon filter is installed on the probe to protect the sensor from contamination.

• HC2-S3. Technical description

HM4 (HygroMet) is a meteorological probe for measuring humidity and air temperature in weather stations, for operation at humidity levels close to 100% with periodic ingress of droplet moisture. The humidity sensor is mounted on a heated substrate, which ensures rapid recovery of the probe after water ingress. A steel mesh filter is installed on the probe to protect the sensor from contamination.

• HM4. Technical Description

MP100 is a meteorological probe for measuring humidity and air temperature in weather stations, with analog output signals 0...1 V, 0...5 V, 0...10 V and a direct 4-wire output of the Pt100 platinum thermometer. A steel mesh filter is installed on the probe to protect the sensor from contamination.

• MP100. Technical description

MP400 is a meteorological probe for measuring humidity and air temperature in weather stations, with analog output signals 0...20 mA, 4...20 mA and a direct 4-wire output of the Pt100 platinum thermometer. A steel mesh filter is installed on the probe to protect the sensor from contamination.

• MP400. Technical description

HC2-S3C03 is a probe for outdoor air, as well as as part of weather stations, for operation at temperatures up to -70 °C. The probe has a built-in power supply voltage regulator and a 3 m extension cable, as a result of which it can be connected to systems with different supply voltages. A Teflon filter is installed on the probe to protect the sensor from contamination.

• HC2-S3C03. Technical description

RS12T/RS24T is an active radiation protective casing with a built-in 12V/24V fan. The casing protects the meteorological sensor from solar radiation, precipitation, and horizontal wind. The fan creates a flowing air flow around the probe, providing faster and more accurate measurements.

• RS12T/RS24T. Technical description

AC1000 is a passive 9-plate radiation protective casing. Provides protection of the meteorological sensor from solar radiation, precipitation, horizontal wind. For HC2-S3-HEATED, HC2-S3 and HC2-S3C03 probes.

• AC1000. Technical description

AC1002 is a passive 10-plate radiation protective casing. Provides protection of the meteorological sensor from solar radiation, precipitation, horizontal wind. For MP100, MP400, HM4 probes.

• AC1002. Technical description

AC1003 is a passive 14-plate radiation protective casing. Provides protection of the meteorological sensor from solar radiation, precipitation, horizontal wind. For MP100, MP400, HM4 probes.

• AC1003. Technical description

Catalog (eng)

Questionnaire